How to Distress Black Furniture with White Paint to Get an Excellent Look

Any home’s décor will look good with black furniture because it is timeless.

You can add a sense of age and character by distressing a wood.

This task is relatively less complicated, even though you don’t have any experience in the woodworking project.

Some tricks are already popular many people know them.

Most popular techniques to distress furniture

Distressing furniture is a common way to give old pieces of furniture a new lease on life.

There are many ways to give your painted furniture a worn, shabby chic look, and everyone has their favorite.

Remember that the results you get will probably be different each time, and the look you make might be very different from the examples.

This makes it fun and interesting, because you can make your style.

We’ll review the most common ways to make something look old to get started.

Distress Black Furniture with White

Wet Distressing Furniture

Wet distressing is a way to get rid of paint by physically rubbing it off with a wet medium. For example, use a wet rag on furniture that has been distressed.

This will get more paint off than sanding, but it won’t hurt the furniture’s finish.

Put some water on a rag and rub it over the paint you want to get off.

You can put a little more pressure on it if you need to.

This is a great way to distress furniture if you don’t want to get rid of the wood’s original stain or don’t want to make dust by sanding.

Distress Furniture with Reverse Paint Distressing

When painting your furniture, use a combination of very thin layers of paint and dry brushing.

How you paint a piece of furniture is the key to reverse paint distressing.

Less paint should be on the raised edges and details, giving the surface a worn look.

You don’t need sandpaper or rags for this method.

For a worn look, use very thin coats of paint, don’t paint where you would normally distress, and use a dry brush to add a little paint to other spots.

Distress Furniture with Vaseline

If you want a different way to make your painted furniture look old, why not try vaseline? Or any wax!

Before you paint something, spread a thin layer of vaseline over the places you want to get rid of the paint.

Then, when the paint is dry, take a cloth and rub the areas where you put vaseline to get rid of the paint.

Milk Paint Distressed Look

Try powdered milk paint if you want something to look very old and worn.

Milk paint is slightly different from other kinds of paint because it dries with a chalky finish.

But it’s nothing at all like chalk paint.

Milk paint makes things look old and worn because it usually chips off in random places.

You must use powdered milk paint and mix it with water before you paint with a brush.

But you brush it on and let it dry as usual.

Then, it will start to come off in different places, especially if you lightly sand it with 220 grit sandpaper, giving it a very worn look.

Distressing Furniture with Glaze or Wax

With antiquing glaze or wax, you can also give your painted furniture a worn look.

Glaze comes in many colors, but brown is the best choice for a worn look.

The same goes for wax. For a worn look, the dark brown wax works best.

Pick one, but don’t do both.

Remember that wax is always put on last. (wax makes paint stay away, right?)

It’s best to put on a clear coat before you use a glaze or wax to make it look old.

So, use a clear coat of water-based polyurethane before adding glaze, and use a clear coat of wax before applying antiquing wax.

A clear coat will make it so that the antiquing medium you choose doesn’t just soak into the paint and make it impossible to wipe off or move as you want.

Distress Painted Furniture with Stain

You can use Varathane weathered gray wood stain to distress painted furniture with stain.

Putting gray wood stain on white paint makes the room look old.

Also, this goes well with the old-fashioned and country-style decor. In the end, any color stain will work to make painted furniture look old.

For example, you could distress furniture with light blue and coral wood stains to give it a coastal beach look.

Use a light stain on paint that is dark and a dark stain on paint that is light.

Because one of the console tables had to match the farmhouse pantry door, the same distressing method was used on both.

How to distress a black table

Sand wood with fine grit. Attach the sandpaper with staples to the wooden block.

Lightly sand the table’s top edge with the sandpaper, working your way around it. You don’t need to sand off the entire edge of the table.

Remove more paint from the corners and a few spots in the center with a gentle sanding.

With the block, lightly sand the foot of the table legs, paying particular attention to the bottom edges.

Dust and debris should be removed from all surfaces by wiping it down with a dust cloth. Seal the wood with white paint to hide the blemishes. You may use paint or foam brush.

How to distress furniture properly

Distressing furniture often involves using 220 grit sandpaper. To make sanding easier, try wrapping sandpaper with d a sanding block. When distressing painted wood using sandpaper, be cautious about using light pressure on the edges. Using this technique, the paint is worn away where it would normally be.

If the flat block cannot reach a particular curve, remove the block from the used sandpaper to smooth it out.

The flat surfaces should also be lightly sanded. For smoothing the finish without discoloring the paint, a light hand is all that is required. Distressing creates dust; wipe it with a clean cloth.

Distressing furniture  to achieve a natural look

How much paint you put on the brush and how hard you push are the keys to obtaining furniture that looks aged and weathered. Apply a thin coat of paint on a clean surface.

It is always advisable to apply some light layers of paint rather than a single thick one. Dip a brush into the can so that only 1/3 of it is covered in paint for the second layer. To avoid dripping paint, scrape the sides of the brush on the

Utilize a damp cloth along the surface, especially the edge, to get a worn-out look. This step looks easier if the imperfection is already there.

With a moist cloth, you may easily wipe the paint. You don’t need to worry if the process will remove too much.

This final phase requires you to look at apiece closely. Add a little additional fading to the current wood finish.

How to paint antiquing furniture

Remove the doors and any hardware from the furniture. To avoid losing them, group your knobs, screws, and hinges together in the bag.

Sanding is the initial stage in creating a clean surface for painting, whether the piece is new unfinished, or old and deteriorated.

You can use orbital sander to sand the surface down. Prep the wood for painting by using sandpaper to remove any previous finish in the crevices.

Remember to apply a thin layer of primer to the piece’s inside and exterior. Allow the paint to dry before applying a second coat.

You may achieve a weathered look on painted furniture by first applying a thin layer of oil-based stain to the surface. Wipe away with a cotton cloth to leave it largely in the recessed sections.

Best Paint for Distressed Furniture

There are many kinds of paint, but I’ll discuss the three most common ones.

Chalk Paint

Chalk paint is probably the most commonly used to make furniture look old. It’s easy to use, dries quickly, and looks great when worn.

Milk Paint

Milk paint is one of a kind because it doesn’t have any binding agents.

It’s easy to chip and flake off, which gives it a rough look.

It also comes in different colors, but you must use the powdered version and mix it with water before brushing it on.

Latex Paint

Latex paint is a good choice if you want to distress your painted furniture on a tight budget.

It’s the cheapest kind of paint and comes in different finishes.

It’s also easy to get because you can buy it at any hardware store.

So, latex paint is the way to go if you want a cheap way to get a worn look.

How to Whitewash Wood in the Most Effective Way

Any unpainted wood can be whitewashed.

No sparkling finish is acceptable. It can be stained, aged, or unfinished.

The worn appearance is achieved by the paint simply gliding over the surface rather than penetrating the wood.

You stain the surface of the wood, then add 1 part water to 2 parts white paint; matte acrylic or flat latex would also work.

Make sure to brush along the direction of the grain and finish the brushing on the entire object simultaneously.

For finishing, wipe the paint off with a clean rag along the wood grain.

It’s up to you how much paint you want to remove in this phase, so leaving a little in a specific spot can provide an interesting result.

Whitewash Black Furniture

How to lighten dark staining on wood

To lighten dark wood, remove any dust from the surface.

Allow the two-part bleach solution to remain on the wood for 30 minutes before scrubbing it off. Neutralize the bleach with a solution of white vinegar, then clean it with a moist towel.

Bleaching may necessitate using chemicals that emit toxic fumes, so be sure to work in an area with enough ventilation.

Apply the chemical stripper to the wood with a paintbrush.

Keep the stripper on the surface in an equal application and cover all the areas you want to brighten.

A distressed furniture cheat strategy

Distressing furniture paint can be accomplished using standard flat latex paint. In terms of cost, it’s a viable option. Using this paint, you can layer two colors and achieve various looks.

The cost of latex paint varies widely from one brand to the next.

It is possible to locate these paints at your local hardware store.

They’re less expensive than buying a brand-new gallon. You also buy a sample or a tiny pint of paint.

Depending on the surface, this paint may not stick.

It can separate that makes a choice is not for long term.

The paint may not be as durable as you’d hoped, and it starts chipping more frequently than you’d prefer.

The paint takes longer to cure.

How to create a distressed black finish

It’s time to go over all the surfaces with your medium-fine sanding. You don’t want to eliminate the current finish but create a slightly rougher surface.

Regardless of how hard you scrub, the surface should remain chalky. To remove any leftover dust, use a tack cloth. It is necessary to apply a single coat of primer to the surface.

While painting and drying, keep the surface flat. This product does not need black paint because it covers it so effectively.

Check around the wood or furniture.

To remove the primer from all corners and high spots, begin sanding with a sponge.

After sanding all, You’ll need lacquer for this one. Lacquer the piece 4-5 times, letting each coat dry.

Distressed Furniture FAQs

Scroll to Top