A vast family of trees known as acacias can be found worldwide, including in Australia and Africa. Only a few of these species’ trees produce hardwood, which is wood suitable for woodworking.
You might be curious about how well this wood takes a stain or paint and the best way to stain it if you use it.
How to correctly stain acacia wood
When handled properly, acacia wood stains pretty well. To achieve the required finish, sand it. You can lift the grain by wetting the wood and allowing it to dry.
When the wood has reached the appropriate color, Sand it lightly, then apply the varnish after staining as evenly as possible.
Acacia is considered hardwood that is long lasting, pest-resistant, and appropriate for frequently used or worn out products, like floors.
Hardwoods are challenging to pain. They can get the stain either penetrates very easily or, if it does, it doesn’t absorb very deeply. It is crucial to utilize the proper stain and techniques to successfully stain acacia wood.
Can You Stain Acacia Wood?
As you know, the tight grain o the hardwood is the reason why you will find difficulty when staining this kind of wood.
The issue with this is that if you sand the wood surface before applying the sealant and the stain does not penetrate deeply, you risk sanding past the penetration point.
Fortunately, this wood can be stained. If you apply the stain appropriately to increase the stain’s penetration into the wood, you will undoubtedly be pleased with the finished product.
Sand the Acacia Wood
The initial process is the same as any wood you want to stain. Sand the surface until it has the desired finish and is ready for regular stain application.
The wood can be sanded to the desired grain for the finished product, but the subsequent process will slightly raise the grain.
The wood needs to be finished with the last grit of sandpaper after the grain is raised and the stain has been applied. A quick sanding is all that is necessary to get rid of the elevated wood grain tops.
Raise The Wood Grain before staining
This additional step helps the stain penetrate the wood more deeply and absorb the most stain possible.
In the world of woodworking, this procedure goes by several names. It is also known as soaking the grain or loosening the grain.
In essence, this procedure straightens the wood fibers at their end, allowing the stain to permeate them and increasing the stain’s depth of penetration.
Wet the wood’s surface using a moist towel or a mop that has been wrung out. The mop or towel shouldn’t be sopping wet so that it leaves water puddles on the wood.
Let the wood dry completely. You must now allow the wood to dry out totally. The wood should be allowed to cure for about 45 minutes. Before starting the next stage, the wood shouldn’t have any visible moisture.
The process of staining acacia wood
After preparation, you can start staining your projects such as furniture or wood-based items.
To prevent some portions of the wood appearing darker than their surrounding because more stain has been placed there than elsewhere, the stain has to be applied on the surface in even coats.
The best method for applying wood stain evenly is using a cloth or sponge rather than a brush. When utilizing this approach, you will need gloves as protection from dripping, soaking, and wetting your hands.
The cloth is used to apply the stain in the same manner as you moistened the wood. Do not allow the cloth to absorb the stain until it drips onto the wood after dabbing it into the stain.
Covering the dripping mark is quite difficult.
You also wipe the stain on the surface from one side and then move along the grain. Apply even layers, being careful not to overlap too much, as this will make them appear darker in the finished product.
If you want the stain to penetrate the wood more effectively, work along the wood’s grain as you apply the stain.
You can follow the same steps and employ the same strategy for the second coat as you did for the first. Keep in mind that if the finished product is excessively dark, it will take a lot of work to remove the stain again.
So, after each application, let it dry completely before adding the next one to check how it appears.
Finishing acacia wood after staining
After the last layer of stain is completely dried, you still have to follow the next procedures in order to bring the smoothness on the wood surface.
When you run your hand over the wood, you can still feel the elevated end grain of the fibers. The surface can be lightly sanded with the final grit you intend to utilize.
Check the surface with your hand directly to ensure the smoothness is at the level you like. If the result is not what you expect, you sand the wood several times to reach the desired smoothness.
What colors of stains work best on acacia wood?
Acacia wood is available in various tones, including golden brown, reddish brown, and deep, rich browns. This means the stain color you choose will rely on the acacia wood’s inherent color.
The lighter colors can be softly stained to mimic darker oak, while the darker colors can be lightly stained to approximate walnut’s deep, rich tones.
Which stain works best on acacia wood?
Acacia wood benefits from oil-based stains because of the ability to penetrate the wood deeply. A solvent, such as a spirit, is frequently used for the stain to dilute the oil and enable good penetration.
The oil keeps the wood from rotting as well. Typically, the oil component is linseed oil, natural oil that works wonders in preserving wood.
It is strong and easy to apply, but it has the drawback of taking a long time until completely dry.
Water is used in place of oil in a water-based solvent to thin the stain and allow it to enter the wood. These stains are more environmentally friendly than oil-based products and enhance the wood’s natural grain.
Although they dry quickly, these stains don’t etch the wood as deeply as oil-based stains do. This kind of stain can be used on acacia wood, and it does not provide the same level of protection and coating as the oil-based version.